TallyGenicom la550n ユーザーガイド

Every printer is shipped with factory default settings. Basic settings 
such as emulation, character size, form length etc., which many ap-
plications make use of, are set. At the end of this chapter you will find 
a

 

menu printout

 

)

 

which shows you the printer’s default set-

tings.

Your printer allows you to set and use four independent menu con-
figurations (Macros). If one of your applications for example requires 
an IBM printer while another program works better with an EPSON 
printer, you can set an IBM emulation configuration with the desired 
settings, and set the second configuration as an EPSON emulation.

The active macro is always the one you used last. When you switch 
on the printer for the very first time, macro no. 1 is loaded. Macro no. 
1 only remains active until you load another macro. The last active 
macro is stored even after the printer is switched off and is reloaded 
automatically when the printer is switched on again.

For example, to change from macro no. 1 to macro no. 3:

Press Setup key.

Press Menu (1) key.

Press Macro (3) key. 

Now the following message appears in the LC display:

Now press the 

 (2) or 

 (3) key repeatedly until Load Macro=3 

appears.

Then select macro no. 3 as the current setting using the Set key (1).

The currently active setting is marked with an asterisk (

).

Ready

Front1

M1 EPS

Online

Setup

2

1

3

4

Adjust

Paprpath

Menu

Char

Online

Setup

2

1

3

4

Print Macro

Back

Next

Online

Setup

Load Macro=1

*

Set

Exit

Online

Setup

2

1

3

4