TallyGenicom la550n ユーザーガイド
User guide
The Menu
70
Paper width (Pagewid)
This parameter determines the actual paper width.
Press the Pagewid key (3).
Setting options narrow printer: From 20 to 80 in 1/10 inch steps
Setting options wide printer:
Setting options wide printer:
From 20 to 136 in 1/10 inch steps
Default setting narrow printer: 136/10"
Default setting narrow printer: 80/10"
(80/136 characters at 10 characters/inch)
Default setting narrow printer: 80/10"
(80/136 characters at 10 characters/inch)
If Head up = On, the print head moves to the calculated center of
the paper during the time the paper is moving in the protected zone.
If Rightzo = On (see below), the print head moves out of the perfo-
ration zone on the right as long as the paper is being transported.
the paper during the time the paper is moving in the protected zone.
If Rightzo = On (see below), the print head moves out of the perfo-
ration zone on the right as long as the paper is being transported.
Set the printing width rather than the actual paper width.
Confirm your settings with the Set key (1) and press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
Left-hand area (Leftzon)
If the parameter is On, the print head moves out of the perforation
zone (area
zone (area
t
) on the left as long as the paper is being transported.
The Pagewid setting has no influence (see above).
Press the Leftzon key (2).
Setting options: On/Off
Default setting: Off
Default setting: Off
Confirm your settings with the Set key (1).
Head up Pagewid
Online
Setup
Back
Next
2
1
3
4
Pagewid=136/10“*
Online
Setup
Set
<
>
Exit
2
1
3
4
Leftzon Rightzo
Online
Setup
2
1
3
4
Back
Next
Leftzon=Off
*
Online
Setup
Set
<
>
Exit
2
1
3
4