TallyGenicom LA48N ユーザーガイド
Setting up the printer
2-13
4.
To secure a parallel interface cable, flip the fastener clips located on the printer
into the notches on the cable connector. To secure a serial interface cable,
tighten the screws in the cable connector.
into the notches on the cable connector. To secure a serial interface cable,
tighten the screws in the cable connector.
5.
Attach the other end of the interface cable to your computer. Gently pull on the
cable to verify that it is secure.
cable to verify that it is secure.
6.
Close the shutter.
NOTE:
When use of the shutter is not required, remove it by using the following pro-
cedure.
cedure.