TallyGenicom 2440 ユーザーガイド
Paper handling
Operating the printer
2-20
Fanfold paper
1.
Move the paper select lever backward to
continuous paper position.
continuous paper position.
2.
If necessary, readjust the Print Gap
lever for continuous forms (see section
“Print Gap Lever” on page 2-19).
lever for continuous forms (see section
“Print Gap Lever” on page 2-19).
3.
Slightly press the single sheet feeder to
the right or to the left, until the holding
pin comes free from its recess. Remove
the feeder.
the right or to the left, until the holding
pin comes free from its recess. Remove
the feeder.
4.
Release the tractor locking levers
A
by
pulling them up. Once the right forms
tractor is positioned, lock it by pulling
up its locking lever.
tractor is positioned, lock it by pulling
up its locking lever.
5.
Raise the tractor doors and fit the first
two paper feed holes onto the right
tractor pins. Close the right tractor
door.
two paper feed holes onto the right
tractor pins. Close the right tractor
door.
A