Linksys EG008W 仕様ガイド

Model No.

Product Data

Eight 10/100/1000Mbps, 
half/full duplex, switched 
ports

Supports address 
learning and aging, 
802.3x flow control 
and head-of-line 
blocking prevention

Forwards and filters 
packets at non-
blocking, full wire 
speed

All ports have auto 
speed negotiation 
and auto MDI/MDI-X 
crossover detection

The Gigabit 8-Port Workgroup Switch provides non-blocking, 
wire speed switching for your 10, 100, and 1000 megabit 
network clients.  Drop this switch in place of your current 
workgroup hub or switch, and you can upgrade your high-
requirement workstations to full Gigabit speeds as 
necessary, while continuing to service other clients at their 
current speeds.  Or build your network from the ground up, 
with appropriate link speeds for each user's requirements.  

Apply this switching power to your current hub-based 
Ethernet network, and your data traffic efficiency will 
improve several times over.  Connect your Gigabit-
equipped workstations to the Switch's 10/100/1000 ports for 
full-duplex, dedicated bandwidth.  It's perfect for graphics, 
multimedia, and other applications that have to move 
large files across the network quickly.

With the Gigabit 8-Port Workgroup Switch, you can connect 
your existing 10/100 Ethernet network to your Gigabit server 
backbone without any additional equipment.  All ports are 
auto-negotiating, and have automatic MDI/MDI-X crossover 
detection, so you don't have to worry about the cable type.  
Address learning and aging is supported, as well as 802.3x 
flow control with head-of-line blocking prevention to keep 
your high-speed clients from bogging down in lower-speed 
traffic.

The Gigabit 8-Port Workgroup Switch from Linksys is the 
perfect solution for your desktop Gigabit and 10/100 
networking needs.

Wire-speed switching and Linksys reliability 
in an 8-Port Gigabit desktop switch