Linksys SD2008 仕様ガイド

The 8-Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching 

for your 10, 100, and 1000 megabit network clients.  Drop this switch in place of 

your current workgroup hub or switch, and you can upgrade your high-requirement 

workstations to full Gigabit speeds as necessary, while continuing to service other 

clients at their current speeds.  Or build your network from the ground up, with 

appropriate link speeds for each user’s requirements.  Either way, it’s perfect for 

graphics, multimedia, and other applications that have to move large files across the 

network quickly.

With the 8-Port 10/100/1000 Gigabit Switch, you can connect your existing 10/100 

Ethernet network to a Gigabit server backbone without any additional equipment.  

All ports have automatic MDI/MDI-X crossover detection, so you don’t have to worry 

about the cable type.  Each port independently and automatically negotiates for best 

speed and whether to run in half- or full-duplex mode.  Address learning and aging is 

supported, as well as 802.3x flow control with head-of-line blocking prevention to keep 

your high-speed clients from bogging down in lower-speed traffic.  Fast store-and-forward 

switching prevents damaged packets from being passed on into the network.

World famous Linksys reliability and the limited lifetime warranty give you peace of mind 

and the new ultra-compact case design is sure to fit into your workgroup environment.  Let 

the Linksys 8-Port 10/100/1000 Gigabit Switch kick your network into high gear.

Eight 10/100/1000Mbps, 
half/full duplex, switched 
ports

Forwards and filters 
packets at non-blocking, 
full wire speed

All ports have auto speed 
negotiation and auto  
MDI/MDI-X crossover 
detection

Linksys reliability and 
limited lifetime warranty