Linksys WRT54GP2A-AT インストール手順

A Division of Cisco Systems, Inc.

®

Model No.

Quick Installation

Model No.

• Wireless-G Broadband Router with 2 Phone Ports
• Setup CD with User Guide
• Norton Internet Security on CD-ROM
• Quick Installation
• Network  Cable
• Power Adapter
• Registration Card
• AT&T CallVantage

sm

 Documents

1

D

Connect your cable or DSL 

modem’s Ethernet cable to the 

Router’s Internet port.

E

Power on the cable or DSL 

modem.

F

Connect the included power 

adapter to the Router’s Power 

port, and then plug the power 

adapter into an electrical 

outlet. 

The Power LED on the front 

panel will start flashing as soon 

as the power adapter is 

connected properly. This LED 

will continue to flash while the 

Router is booting up.

G

When the Power LED stops 

flashing and is solidly lit, power 

on the PC you wish to use to 

configure the Router.

In Step 2, you will need the setup 

instructions provided by your high-

speed Internet service provider. If 

you do not have this information, 

then contact your high-speed 

Internet service provider before 

proceeding.

A

Open your PC’s web browser. 

Enter http://192.168.15.1 (the 

Router’s default local IP 

address) in the web browser’s 

Address field. Then press the 

Enter key.

B

A screen will appear and ask 

you for a User Name and 

Password. Leave the User 

Name field blank, and enter 

admin (the default) in the 

Password field. (Later you 

should set a new password 

using the Administration tab’s 

Management screen. This will 

help secure access to the 

Web-based Utility.) 

Then click OK.

C

The Router’s Web-based Utility 

will appear with the Basic Setup 

screen showing.

D

Four types are offered for the 

Internet Connection Type 

setting. Depending on which  

you select, the features 

available on the Basic Setup 

screen will differ. Proceed to 

the instructions for your 

connection type.

GHz

2.4

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - It is strongly recommended that you use the 

Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and 

follow the on-screen instructions.

 •Use this Quick Installation guide - If you wish, you can use the Router’s 

Web-based Utility. Proceed to Step 1 of this Quick Installation.

A

Make sure that all of your 

hardware is powered off, 

including the Router, PCs, and 

cable or DSL modem.

B

Connect one end of an 

Ethernet network cable to one 

of the numbered ports on the 

back of the Router. Connect 

the other end to an Ethernet 

port on a network device, e.g., 

a PC, print server, or switch.

Repeat this step to connect 

more PCs or other network 

devices to the Router.

C

Plug a standard telephone into 

the Router’s Phone1 port. 

C

B

NOTE: Make sure your telephone 
is set to its tone setting (not 
pulse).

D

F

2

B

A

NOTE: Make sure your PC’s 
Ethernet adapter is set to obtain 
an IP address automatically. For 
more information, refer to 
Windows Help.

C