GE ewa5600 ユーザーガイド

• Water may not cover the top level of the clothes. 

This is normal for this high-efficiency washer.

• The drain stand pipe must be above 30".

• Measure your detergent carefully. Use less soap if you have 

soft water, a smaller load or a lightly soiled load.

• Switch to HE

detergent.

• Try less detergent.

• Use less detergent. Use less soap if you have soft water,  

a smaller load or a lightly soiled load.

• Switch to HE

detergent.

• Make sure hose connections are tight at faucets and 

rubber washers are installed. Make sure end of drain hose 
is correctly inserted in and secured to drain facility.

• Check household plumbing. You may need to call

a plumber.

• Tighten hoses at the faucets and turn the water off after 

each use.

• Check condition of the fill hoses; they should be replaced

every 5 years.

• New laundry detergents have been formulated to work 

with cooler water temperatures without affecting wash

performance.

• Turn both hot and cold faucets fully on and make sure 

hoses are connected to correct faucets.

• Turn off the water source and remove the water connection

hoses from the upper back of the washer. Use a brush or
toothpick to clean the screens in the machine. Reconnect
the hoses and turn the water back on.

• Make sure house water heater is delivering water at

120°F–140°F (48°C–60°C).

• Reset cycle.

• Straighten drain hose and make sure washer is not  

sitting on it.

• Top of drain outlet should be less than 6 ft (1.8 m) 

above floor.

The PREWASH Cycle or 

• This is normal. The washer alternates between agitate and

AUTO SOAK Option was 

soak during these cycles to get your clothes cleaner with

less wear.

• The washer may pause during the spin cycle to remove 

soapy water more efficiently.

8