Alcatel-Lucent 6850-48 補足マニュアル
Overview of User Accounts
Managing Switch User Accounts
page 8-6
OmniSwitch AOS Release 6 Switch Management Guide
September 2009
Quick Steps for Network Administrator User Accounts
1 Configure the user with the relevant username and password. For example, to create a user called
thomas with a password of techpubs, enter the following:
thomas with a password of techpubs, enter the following:
-> user thomas password techpubs
For information about creating a user and setting up a password, see
.
2 Configure the user privileges (and SNMP access) if the user should have privileges that are different
than those set up for the default user account. For example:
than those set up for the default user account. For example:
-> user thomas read-write domain-network ip-helper telnet
For information about the default user settings, see the next section. For information about setting up privi-
leges, see
leges, see
.
command. The display is similar to the
following:
User name = admin
Read Only for domains
= None,
Read/Write for domains
= All ,
Snmp not allowed
User name = public
Read Only for domains
= None,
Read/Write for domains
= All ,
Snmp authentication
= NONE, Snmp encryption = NONE
User name = thomas
Read Only for domains
= None,
Read/Write for domains
= Network ,
Read/Write for families
= telnet ip-helper ,
Snmp not alloweds
User name = default
Read Only for domains
= None,
Read/Write for domains
= None,
Snmp not allowed
For more information about the show user command, see the OmniSwitch CLI Reference Guide.