Alcatel-Lucent 6850-48 ネットワークガイド

Remote Monitoring (RMON)

Diagnosing Switch Problems

page 45-36

OmniSwitch AOS Release 6 Network Configuration Guide

To enable or disable an individual RMON probe, enter the 

 CLI command. Be sure to spec-

ify the type of probe (stats/history/alarm), followed by the entry number (optional), as shown in the 
following examples.

The following command enables RMON Ethernet Statistics probe number 4012:

-> rmon probes stats 4012 enable

The following command disables RMON History probe number 10240:

-> rmon probes history 10240 disable

The following command enables RMON Alarm probe number 11235:

-> rmon probes alarm 11235 enable

To enable or disable an entire group of RMON probes of a particular flavor type (such as Ethernet 
Statistics, History, or Alarm), enter the command without specifying an entry-number, as shown in the 
following examples.

The following command disables all currently defined (disabled) RMON Ethernet Statistics probes:

-> rmon probes stats disable

The following command enables all currently defined (disabled) RMON History probes:

-> rmon probes history enable

The following command enables all currently defined (disabled) RMON Alarm probes:

-> rmon probes alarm enable

Note. Network activity on subnetworks attached to an RMON probe can be monitored by Network 
Management Software (NMS) applications.