Alcatel-Lucent 6850-48 ネットワークガイド
Configuring MPLS
Verifying the MPLS Configuration
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 10-41
Verifying the MPLS Configuration
To display information about the LDP-based MPLS configuration and status for the switch, use the show
commands listed in the following table:
commands listed in the following table:
In addition to using the above show commands to verify the MPLS configuration, the following
commands are available to verify MPLS Label Switched Paths (LSPs):
commands are available to verify MPLS Label Switched Paths (LSPs):
For more information about the use and resulting displays form all of the above commands, see the
Omniswitch CLI Reference Guide.
Omniswitch CLI Reference Guide.
Displays the status and other configuration information for the MPLS
instance.
instance.
Displays the status and other configuration information for the LDP
instance.
instance.
Displays the LDP interface configuration for the switch.
Displays the global LDP parameter values for the switch.
Displays information about LDP sessions.
Displays information about LDP peers.
Displays the discovery status of the LDP Hello adjacencies between the
local router and LDP peers.
local router and LDP peers.
Displays the contents of the MPLS Label Information Base (LIB).
Displays the static LSP configuration for the switch.
Displays the MPLS interface configuration for the switch.
Displays the MPLS labels that are exchanged.
Displays the MPLS label ranges, which includes the label type, start and
end label values, aging, and the number of labels available.
end label values, aging, and the number of labels available.
Performs an Operation Administration and Maintenance (OAM) in-
band connectivity test for an existing MPLS LSP.
band connectivity test for an existing MPLS LSP.
Performs an OAM traceroute for an existing MPLS LSP.