Alcatel-Lucent 6850-48 ネットワークガイド
Ethernet OAM Specifications
Configuring Ethernet OAM
page 15-2
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Ethernet OAM Specifications
The following table lists Ethernet OAM specifications.
Ethernet OAM Defaults
The following table shows Ethernet OAM default values.
IEEE Standards Supported
IEEE 802.1ag–Connectivity Fault Management
IEEE 802.3ah–CSMA/CD Access Method and Physical
IEEE 802.3ah–CSMA/CD Access Method and Physical
Layer Specifications
IEEE 802.1D–Media Access Control (MAC) Bridges
IEEE 802.1Q–Virtual Bridged Local Area Networks
IEEE 802.1Q–Virtual Bridged Local Area Networks
Platforms Supported
OmniSwitch 6400, 6850, 6855, and 9000
Maximum Maintenance Domains (MD)
per Bridge
per Bridge
8
4 (OmniSwitch 6400)
4 (OmniSwitch 6400)
Maximum Maintenance Associations
(MA) per Bridge
(MA) per Bridge
128
64 (OmniSwitch 6400)
64 (OmniSwitch 6400)
Maximum Maintenance End Points
(MEP) per Bridge
(MEP) per Bridge
256
128 (OmniSwitch 6400)
128 (OmniSwitch 6400)
Maximum MEP CMM Database Size
(Note: This max value was not included
in Specs table prior to 6.3.3.)
(Note: This max value was not included
in Specs table prior to 6.3.3.)
8192
4092 (OmniSwitch 6400)
4092 (OmniSwitch 6400)
Parameter Description
Command
Default Value/Comments
MHF value assigned to a default
Ethernet OAM Maintenance Domain
Ethernet OAM Maintenance Domain
none
Continuity Check Message interval
interval10s
The priority value for CCMs and
LTMs transmitted by the MEP
LTMs transmitted by the MEP
7
The lowest priority fault alarm for
the lowest priority defect for a MEP
the lowest priority defect for a MEP
mac-rem-err-xcon
Number of Loopback messages to be
transmitted
transmitted
1
Data Type Length Value
64
VLAN priority
0
Whether or not Drop Enable bit is
configured (true or false)
configured (true or false)
true
Hop count
64
Fault notification generation alarm
time
time
250 centiseconds