Alcatel-Lucent 6850-48 ネットワークガイド

ページ / 1162
Application Example
Configuring 802.1Q
page 21-8
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Application Example
In this section the steps to create 802.1Q connections between switches are shown.
The following diagram shows a simple network employing 802.1Q on both regular ports and link aggrega-
tion groups. 
The following sections show how to create the network illustrated above. 
Connecting Stack 1 and Switch 2 Using 802.1Q
The following steps apply to Stack 1. They will attach port 1/1 to VLAN 2 and set the port to accept 
802.1Q tagged traffic and untagged traffic.
Create VLAN 2 by entering vlan 2 as shown below (VLAN 1 is the default VLAN for the switch):
-> vlan 2
Set port 1/1 as a tagged port and assign it to VLAN 2 by entering the following:
-> vlan 2 802.1q 1/1
Check the configuration by using the 
 command as follows:
-> show 802.1q 1/1
Acceptable Frame Type
:
Any Frame Type
Force Tag Internal
:
NA
Tagged VLANS
Internal Description
-------------+-------------------------------------------------+
2
TAG PORT 1/1 VLAN 2
Ports 
4/1, 4/2
Stack 1
Switch 2
Stack 3
VLAN 1
(untagged)
VLAN 2
(tagged)
VLAN 3
(tagged)
VLAN 1
(untagged)
VLAN 3
(tagged)
VLAN 1
(untagged)
VLAN 2
(tagged)
Aggregate 
Link 5
Ports 
3/1, 3/2
Port 1/1
(untagged/
tagged)
Port 2/1
(tagged)