Alcatel-Lucent 6850-48 参照ガイド

ページ / 3444
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-3
configure router ldp shutdown
Configures the administrative status of the Label Distribution Protocol (LDP) instance on the router.
configure router ldp {no shutdown | shutdown}
Syntax Definitions
no shutdown
Enables the LDP administrative status on the router.
shutdown
Disables the LDP administrative status on the router. 
Defaults         
By default, LDP is enabled for the switch.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Disabling the LDP administrative status also disables any associated Label Switch Paths (LSPs) and 
any Service Distribution Points (SDPs) that were attached to the LSPs.
• When LDP is disabled on the switch, attaching SDPs to any of the associated LSRs is not allowed.
Examples
-> configure router ldp shutdown
-> configure router ldp no shutdown
Release History
Release 6.4.2; command was introduced.
Related Commands
MIB Objects
vRtrLdpGeneralTable
vRtrLdpGenAdminState
Displays status information and statistics for the LDP instance on the 
local router.