Alcatel-Lucent 6850-48 参照ガイド

MPLS LDP Commands

page 24-6

OmniSwitch CLI Reference Guide

Configures the administrative status for the specified LDP interface.

configure router ldp interface-parameters interface ip-intf-name {no shutdown | shutdown}

The name of an existing LDP interface.

Enables the LDP administrative status for the interface.

Disables the LDP administrative status for the interface. 

By default, the administrative status of an LDP interface is enabled.

OmniSwitch 9000E

• Disabling the administrative status for an LDP interface does not remove the LDP configuration from 

that interface.

• The LDP interface name specified with this command must already exist in the router configuration.

-> configure router ldp interface-parameters interface vlan-14 shutdown

-> configure router ldp interface-parameters interface vlan-14 no shutdown

Release 6.4.2; command was introduced.

vRtrLdpIfTable

vRtrID 

vRtrLdpIfIndex 

vRtrLdpPeerAddress

vRtrLdpIfRowStatus

Configures LDP support on an IP interface. 

Displays the LDP interface configuration for the router.