Alcatel-Lucent 6850-48 参照ガイド
MPLS LDP Commands
page 24-42
OmniSwitch CLI Reference Guide
September 2009
show router ldp bindings egress-label
Displays egress LDP bindings for a specific label number or for a range of label numbers.
show router ldp bindings egress-label start-label [end-label]
Syntax Definitions
start-label
The egress label number to display. The valid range is 16–1048575.
end-label
The last egress label number in a range of labels to display. The valid
range is 17–1048575.
range is 17–1048575.
Defaults
By default, all egress LDP bindings starting with the specified label number are displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the optional end-label parameter along with the start-label parameter to specify a range of egress
label bindings to display.
• If an ending label number is not specified, then all egress label bindings beginning with the starting
label number forward are displayed. No range is specified.
Examples
->show router ldp bindings egress-label 131071
LDP LSR ID: 10.11.0.6
Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,
S = Status Signaled Up, D = Status Signaled Down,
R = VPRN Service, V = VPLS Service, W = VPWS Service
TLV = (Type, Length: Value)
LDP Prefix Bindings
Prefix Peer IngLbl EgrLbl EgrIntf EgrNextHop
------------------+---------------+-------+------+-------------+---------------
10.10.0.7/32 10.10.0.7 -- 131071 -- --
No. of Prefix Bindings: 1
LDP Service FEC 128 Bindings
Type VCId SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----
No Matching Entries Found
LDP Service FEC 129 Bindings
AGI SAII TAII