Alcatel-Lucent 6850-48 参照ガイド
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-49
show router ldp bindings vc-type
Displays the LDP bindings for the specified virtual circuit (VC) type.
show router ldp bindings vc-type vc-type [vc-id vc-id [session ip-address [:label-space]]
Syntax Definitions
vc-type
The virtual circuit type. Valid types are ethernet, vlan, and mirror.
vc-id
The virtual circuit ID number. The valid range is 1–4294967295.
ip-address
The LDP router ID (Loopback0 IP address configured for the switch)
for a specific LDP session.
for a specific LDP session.
:label-space
The label space ID number that the router advertises on the LDP inter-
face. This value is appended to the LDP router ID address. The valid
range is 0–65535.
face. This value is appended to the LDP router ID address. The valid
range is 0–65535.
Defaults
By default, LDP bindings for all VC IDs and all sessions for each VC ID are displayed for the specified
VC type.
VC type.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the vc-id parameter to display the LDP bindings for a specific VC ID number.
• Use the session parameter to display the LDP bindings for a specific session associated with the speci-
fied VC ID number.
Examples
->show router ldp bindings vc-type ethernet
LDP LSR ID: 10.11.0.6
Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,
S = Status Signaled Up, D = Status Signaled Down,
R = VPRN Service, V = VPLS Service, W = VPWS Service
TLV = (Type, Length: Value)
LDP Service FEC 128 Bindings
Type VCId SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----
V-Eth 100 100 10 10.11.0.66 131068U 131068 1500 1500
LDP Service FEC 129 Bindings
AGI SAII TAII
Type SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----