Alcatel-Lucent 6850-48 参照ガイド

MPLS LDP Commands

OmniSwitch CLI Reference Guide

page 24-57

Displays the discovery status of the LDP Hello adjacencies associated with the specified LDP peer.

show router ldp discovery peer ip-address [state {trying | established | down}] [detail]

The IP address of the LDP peer.

Displays LDP interfaces that are trying to establish an adjacency with 
peers.

Displays LDP interfaces that have established adjacencies with peers.

Displays LDP interfaces with adjacencies that are down.

Displays detailed information for LDP hello adjacencies.

By default, the discovery status for the LDP Hello adjacencies with the specified LDP peer is displayed.

OmniSwitch 9000E

• Use the state parameter with the trying, established, or down options to display LDP adjacencies that 

are in a specific state of discovery.

• Use the detail parameter to display additional discovery information and statistics for the adjacencies.

->show router ldp discovery peer 10.11.0.6 

LDP Hello Adjacencies

Interface Name                   Local Addr      Peer Addr       AdjType State 

--------------------------------+---------------+---------------+--------------

vlan-30                          10.11.0.66      10.11.0.6       Targ    Estab 

No. of Hello Adjacencies: 1

->show router ldp discovery peer 10.11.0.6 detail 

LDP Hello Adjacencies (Detail)

    Peer 10.11.0.6

      Local Address:       10.11.0.6,          Peer Address:         10.10.0.7,        

      Adjacency Type:      Link,               State:                Established,      

      Up Time:             0d 03:14:22,        Hold Time Remaining:  15,               

      Hello Mesg Recv:     2917,               Hello Mesg Sent:      2917,             

      Local IP Address:    30.30.30.66,        Remote IP Address:    30.30.30.77,      

      Local Hello Timeout: 15,                 Remote Hello Timeout: 15,