Alcatel-Lucent 6850-48 参照ガイド
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-63
show router ldp interface
Displays the LDP interface configuration for the local router.
show router ldp interface [ip-intf-name | ip-address] [detail]
Syntax Definitions
ip-intf-name
The name of an existing LDP interface.
ip-address
The IP address of an existing LDP interface.
detail
Displays detailed adjacency information for the specified interface.
Defaults
By default, the configuration for all LDP interfaces is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the ip-intf-name and ip-address parameters to display information for a specific interface.
• Use the detail parameter to display additional information and statistics for LDP interfaces.
Examples
->show router ldp interface
LDP Interfaces
Interface
Adm Opr
Hello
Hold
KA
KA
Transport
Factor Time Factor Timeout Address
--------------------------------+---+----+------+-----+------+-------+---------
vlan-30 Up Up 3 15 3 30 System
No. of Interfaces: 1
->show router ldp interface detail
LDP Interfaces (Detail)
Interface "vlan-30"
Admin State: Up, Oper State: Up,
Hold Time: 15, Hello Factor: 3,
Keepalive Timeout: 30, Keepalive Factor: 3,
Transport Addr: System,
Last Modified: 05/26/2009 23:14:27,
Active Adjacencies: 1,
Tunneling: Disabled,
Lsp Name : None