Alcatel-Lucent 6850-48 参照ガイド
MPLS LDP Commands
page 24-70
OmniSwitch CLI Reference Guide
September 2009
show router ldp peer
Displays configuration information for LDP peers.
show router ldp peer [ip-address] [detail]
Syntax Definitions
ip-address
The IP address of an LDP peer.
detail
Displays detailed information for the specified peers.
Defaults
By default, the configuration for all LDP peers is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the ip-address parameter to display information for a specific LDP peer.
• Use the detail parameter to display additional information and statistics for the specified LDP peers.
Examples
->show router ldp peer
LDP Peers
Peer Adm Opr Hello Hold KA KA Passive Auto
Factor Time Factor Timeout Mode Created
-----------------+----+----+-------+-------+-------+--------+---------+--------
10.11.0.6 Up Up 3 45 4 40 Disabled Yes
20.1.2.3 Up Up 3 45 4 40 Disabled Yes
30.1.2.3 Up Up 3 45 4 40 Disabled Yes
No. of Peers: 3
->show router ldp peer detail
LDP Peers (Detail)
Peer 10.11.0.66
Admin State: Up, Oper State:
Up,
Hold Time: 45, Hello Factor:
3,
Keepalive Timeout: 40, Keepalive Factor: 3,
Passive Mode:
Disabled,
Last Modified:
05/26/2009 23:14:27,
Active Adjacencies: 1, d:
Yes,
Tunneling: Disabled,
Lsp Name: None