Alcatel-Lucent 6850-48 参照ガイド
MPLS Static LSP and FRR Commands
OmniSwitch CLI Reference Guide
September 2009
page 25-27
show router mpls label
Displays the MPLS labels that are exchanged.
show router mpls label start-label [end-label [label-filter]]
Syntax Definitions
start-label
The label value assigned to the ingress router.
end-label
The label value assigned to the egress router.
label-filter
The types of labels to display. The valid entries for this parameter are
in-use, bgp, ildp, mirror, rsvp, static, svcmgr, tldp, or vprn. Enter
one type per command.
in-use, bgp, ildp, mirror, rsvp, static, svcmgr, tldp, or vprn. Enter
one type per command.
Defaults
N/A
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the command parameters provided to display information for specific types of labels.
Examples
-> show router mpls label 500
MPLS Label 500
Label Label Type Label Owner
---------------+-------------------+------------------
500 static-lsp STATIC
In-use labels in entire range : 8
-> show router mpls label 32 80 static
MPLS Labels from 32 to 80 (Owner: STATIC)
Label Label Type Label Owner
-------------------+-------------------+------------------------
In-use labels (Owner: STATIC) in specified range: 0
In-use labels (Owner: All) in specified range : 0
In-use labels in entire range : 9