Alcatel-Lucent 6850-48 参照ガイド
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide
September 2009
page 26-25
configure service sdp adv-mtu-override
Enables or disables VC-type MTU override for the specified SDP. Use this command to override the
advertised VC MTU with the service MTU.
advertised VC MTU with the service MTU.
configure service sdp sdp-ip adv-mtu-override
configure service sdp sdp-ip no adv-mtu-override
Syntax Definitions
sdp-id
An existing SDP ID number.
Defaults
By default, VC-type MTU override is disabled. The service MTU does not override the advertised VC
MTU.
MTU.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the no form of this command to disable VC-type MTU override for the specified SDP.
• When VC-type MTU override is enabled, the router signals a VC MTU equal to the service MTU
(includes the Layer 2 header). When disabled, the service MTU minus the Layer 2 header is adver-
tised. In the receive direction, either VC-type MTU is accepted.
tised. In the receive direction, either VC-type MTU is accepted.
Examples
-> configure service sdp 10 adv-mtu-override
-> configure service sdp 10 no adv-mtu-override
Release History
Release 6.4.2; command was introduced.