Alcatel-Lucent 6850-48 参照ガイド
Virtual Private LAN Service (VPLS) Commands
page 26-80
OmniSwitch CLI Reference Guide
September 2009
show service sdp
Displays the Service Distribution Point (SDP) configuration for the switch.
show service sdp [sdp-id] [detail]
Syntax Definitions
sdp-id
An existing SDP ID number.
detail
Displays detailed SDP information.
Defaults
By default, a list of all SDPs is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the sdp-id parameter to display information for a specific SDP.
• Use the detail parameter to display additional information about the SDPs.
Examples
-> show service sdp
Services: Service Destination Points
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
--------+---------+---------+----------------+----+-----------+-------+--------
12 0 1514 1.1.1.3 Up Up LDP TLDP
22 0 1514 1.1.1.4 Up Up LDP TLDP
32 0 1514 1.1.1.5 Up Up LDP TLDP
111 0 1514 1.1.1.1 Up Up LDP TLDP
Number of SDPs : 4
-> show service sdp 32
Services: Service Destination Points
SdpId Adm MTU Opr MTU IP address Adm Opr Deliver Signal
--------+---------+---------+----------------+----+-----------+-------+--------
32 0 1514 1.1.1.5 Up Up LDP TLDP