Alcatel-Lucent 6850-48 参照ガイド
Virtual Private LAN Service (VPLS) Commands
page 26-88
OmniSwitch CLI Reference Guide
September 2009
show service id base
Displays basic information about the specified service, including a list of SDPs and SAPs associated with
the service.
the service.
show service id service-id base
Syntax Definitions
service-id
An existing VPLS ID number.
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
The service ID is a unique number that identifies a specific VPLS. All information associated with the
service ID is displayed.
service ID is displayed.
Examples
-> show service id 9999 base
Service Basic Information
Service Id: 100, Vpn Id: N/A,
Service Type: VPLS,
Customer Id: 1,
Last Status Change: 01/19/2009 13:09:36,
Last Mgmt Change: 01/19/2009 13:09:10,
Admin State: Up, Oper State: Up,
MTU: 1514, Def. Mesh VC Id: 100,
SAP Count: 5, SDP Bind Count: 1,
Snd Flush on Fail: Disabled, Host Conn Verify: N/A,
Propagate MacFlush: N/A
Service Access & Destination Points
Identifier Type AdmMTU OprMTU Adm Opr
----------------------------------------+------------+-------+-------+----+-----
sap:1/2:100 q-tag 1518 1518 Up Down
sap:1/2:110 q-tag 1518 1518 Up Down
sap:1/2:all q-tag 1518 1518 Up Down
sap:1/11:200 q-tag 1518 1518 Up Up
sap:8/8:300 q-tag 1518 1518 Up Up
sdp:10:100 M(10.11.0.6) n/a 1514 1514 Up Up