Alcatel-Lucent 6850-48 参照ガイド
Virtual Private LAN Service (VPLS) Commands
page 26-104
OmniSwitch CLI Reference Guide
September 2009
show service egress-label
Displays the services that are using a specific egress label or a range of egress labels.
show service egress-label start-label [end-label]
Syntax Definitions
start-label
An egress label number. The valid range is 0 or 16–131071.
end-label
The last egress label number in a range of labels. The valid range is
2049–131071.
2049–131071.
Defaults
By default, all services associated with the starting label number are displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the optional end-label parameter along with the start-label parameter to specify a range of egress
labels.
• If an ending label number is not specified, then all services using the starting label number are
displayed. No range is specified.
Examples
-> show service egress-label 131070
Martini Service Labels
Svc Id Sdp Binding Type I.Lbl E.Lbl
----------+------------------+-----+---------------------+---------------------
100 10:100 Mesh 131069 131070
Number of Bindings Found : 1
output definitions
Svc Id
The unique service identification number used to identify the service.
SDP Binding
The SDP ID number associated with the service.
Type
The SDP binding type (mesh or spoke) for the service. The spoke SDP
binding type is not supported.
binding type is not supported.
I.Lbl
The VC label used by the far-end device to send packets to the local
device for this SDP binding.
device for this SDP binding.
E.Lbl
The VC label used by the local device to send packets to the far-end
device for this SDP binding.
device for this SDP binding.