Alcatel-Lucent 6850-48 参照ガイド
Ethernet OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 28-19
ethoam endpoint admin-state
Configures the administrative state of MEP.
ethoam endpoint mep_id domain {domain_name | mac_address} association association_name admin-
state {enable | disable}
state {enable | disable}
Syntax Definitions
mep_id
Specifies the Maintenance Association End Point. The valid range is
1–8191.
1–8191.
domain_name
Specifies the domain name. For more information on the different
formats of the domain name, refer to
formats of the domain name, refer to
mac_address
Specifies the CFM system MAC address.
association_name
Association name of the Ethernet OAM Association. Up to 48 (minus
the domain name length) characters may be used.
the domain name length) characters may be used.
enable
Administratively enables MEP.
disable
Administratively disables MEP.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
The mep_id should be unique amid all those used by or available to the service provider in the specified
MA.
MA.
Examples
-> ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales
admin-state enable
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; mac_address parameter added.
Release 6.3.1; mac_address parameter added.