Alcatel-Lucent 6850-48 参照ガイド

Port Mapping Commands

page 31-2

OmniSwitch CLI Reference Guide

Creates a port mapping session either with or without the user ports, network ports, or both. Use the no 
form of the command to delete ports or an aggregate from a session.

port mapping port_mapping_sessionid [no] [user-port {slot slot | slot/port[-port2] | linkagg agg_num}]
[network-port {slot slot | slot/port[-port2] | linkagg agg_num}]

The port mapping session ID. Valid range is 1 to 8.

Specifies a user port of the mapping session.

Specifies a network port of the mapping session.

Specifies a slot to be assigned to the mapping session.

Slot number you want to configure.

Port number you want to configure.

Last port number in a range of ports you want to configure.

Specifies a link aggregation group to be assigned to the mapping 
session.

Link aggregation number.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• User ports that are part of one session cannot communicate with each other and can communicate only 

via network ports of the session to the rest of the system.

• User ports can be part of one Port Mapping session only.

• An aggregable port of a link aggregation group cannot be a mapped port and a mapped port cannot be 

an aggregable port of a link aggregation group.

• A mirrored port cannot be a mapped port and a mapped port cannot be a mirrored port.

• A mobile port cannot be configured as a network port of a mapping session.