Alcatel-Lucent 6850-48 参照ガイド

IP Commands

page 32-52

OmniSwitch CLI Reference Guide

Configures the tag value of the route being distributed.

ip route-map route-map-name [sequence-number number] set tag tag-number 

no ip route-map route-map-name [sequence-number number] set tag tag-number

The name of the route map (up to 20 characters).

A number that links together the route maps. The range is 1–100.

Configures the tag number.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete the set tag parameter in the route map.

• All route maps having the same name but different sequence numbers are linked together and 

processed in order of increasing sequence number.

• The route-map-name and sequence-number should exist before you configure this set criteria.

-> ip route-map 111 sequence-number 50 set tag 23

-> no ip route-map 111 sequence-number 50 set tag 23

Release 6.1.3; command was introduced.

50

Creates a route map for redistribution and sets the status of the route 
map to permit or deny.

Displays the configured IP route maps.