Alcatel-Lucent 6850-48 参照ガイド
Power over Ethernet (PoE) Commands
page 4-6
OmniSwitch CLI Reference Guide
September 2009
lanpower power
Specifies the maximum amount of inline power, in milliwatts, available to a specific PoE port. The value
specified is used to supply inline power to devices such as IP telephones and wireless LAN devices.
specified is used to supply inline power to devices such as IP telephones and wireless LAN devices.
lanpower {slot/port | slot} power milliwatts
Syntax Definitions
slot/port
A PoE port on which the maximum amount of inline power is being
configured.
configured.
milliwatts
The maximum amount of inline power, in milliwatts, being made avail-
able to the corresponding port. Refer to the OmniSwitch Hardware
Users Guide PoE specifications.
able to the corresponding port. Refer to the OmniSwitch Hardware
Users Guide PoE specifications.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
• Using this command does not immediately allocate the power to the slot or port. Any unused power is
still available and remains a part of the overall PoE budget.
• To globally specify the amount of inline power available to all ports in a slot, refer to the
.
• Be sure that the value specified complies with specific power requirements for all attached IP tele-
phones and wireless LAN devices.
command is specified in milliwatts (mW); the
related command,
, is specified in watts (W).
Examples
-> lanpower 3/1 power 3025
Release History
Release 6.1; command was introduced.
parameter
default
Range
milliwatts (OS6400)
15400
3000-18000
milliwatts (OS6850 )
15400
3000-18000
milliwatts (OS6855)
15400
3000-20000
milliwatts (OS9000)
15400
3000-18000