Alcatel-Lucent 6850-48 参照ガイド
IPv6 Commands
OmniSwitch CLI Reference Guide
September 2009
page 33-69
show ipv6 redist
Displays the IPv6 route map redistribution configuration.
show ipv6 redist [rip | ospf | bgp]
Syntax Definitions
rip
Displays the route map redistribution configurations that specify RIP as
the destination (into) protocol.
the destination (into) protocol.
ospf
Displays the route map redistribution configurations that specify OSPF
as the destination (into) protocol.
as the destination (into) protocol.
bgp
This parameter is not supported.
Defaults
By default all route map redistribution configurations are shown.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Specify a destination protocol with this command to display only those configurations that redistribute
routes into the specified protocol.
• The IPv6 version of BGP is not supported currently.
Release History
Release 6.1.3; command was introduced.
Examples
-> show ipv6 redist
Source Destination
Protocol Protocol Status Route Map
------------+------------+---------+--------------------
localIPv6 RIPng Enabled ipv6rm
RIPng OSPFv3 Enabled ipv6rm
-> show ipv6 redist ospf
Source Destination
Protocol Protocol Status Route Map
------------+------------+---------+--------------------
RIPng OSPFv3 Enabled ipv6rm