Alcatel-Lucent 6850-48 参照ガイド
DHCP Relay Commands
OmniSwitch CLI Reference Guide
September 2009
page 36-59
show ip helper dhcp-snooping port
Displays the trust mode and DHCP Snooping violation statistics for all switch ports that are filtered by
DHCP Snooping.
DHCP Snooping.
show ip helper dhcp-snooping port
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• If DHCP Snooping is operating at the switch level, then information for all switch ports is displayed.
• If DHCP Snooping is operating at the VLAN level, then information for only those ports that are asso-
ciated with a DHCP Snooping VLAN is displayed.
• The violation statistics displayed only apply to ports that are in the client only trust mode. When the
trust mode for a port is changed from client-only to trusted or blocked, the violation counters are set
to zero (0).
to zero (0).
Examples
-> show ip helper dhcp-snooping port
Slot Trust IP Src
Opt82 MAC Server Relay
Binding
Port Mode Filtering Violation Violation Violation Violation Violation
-----+-------------+----------+----------+----------+----------+---------|---------
1/1
Blocked
Disabled
0 0 0 0
0
1/2
Client-Only
Enabled
0 0 0 0
0
1/3 Client-Only
Enabled
0 0 0 0
0
1/4 Client-Only
Enabled
0 0 0 0
0
1/5 Client-Only
Enabled
0 0 0 0
0
1/6
Blocked
Disabled
0 0 0 0
0
1/7 Client-Only
Enabled
0 0 0 0
0
1/8 Client-Only
Enabled
0 0 0 0
0
1/9 Client-Only
Enabled
0 0 0 0
0
1/10 Trusted
Disabled
0 0 0 0
0
1/11 Trusted
Disabled
0 0 0 0
0
1/12 Trusted
Disabled
0 0 0 0
0