Alcatel-Lucent 6850-48 参照ガイド

OmniSwitch CLI Reference Guide

page 38-1

The Internet Packet Exchange (IPX) protocol, developed by Novell for NetWare, is a protocol used to 
route packets through IPX networks. IPX specifies a connectionless datagram similar to the IP packet of 
TCP/IP networks. An IPX network address consists of two parts: a network number and a node number. 
The IPX network number is assigned by the network administrator. The node number is the Media Access 
Control (MAC) address for a network interface in the end node.

IPX exchanges information using its own Routing Information Protocol (RIP), which sends updates every 
60 seconds. NetWare also supports a Service Advertising Protocol (SAP) to allow network resources, 
including file and print servers, to advertise their network addresses and the services they provide. The 
user can also define a specific route. These routes, called static routes, have higher priority than routes 
learned through RIP.

IPX supports multiple encapsulation types for Ethernet:. 802.3 Raw, 802.3, Ethernet v2, and SNAP. 

MIB information for the IPX commands is as follows:

AlcatelIND1IPX.mib

alaIPXMIB

A summary of the available commands is listed here: 

ipx routing
ipx default-route
ipx route
clear ipx route
ping ipx
ipx filter rip
ipx filter sap
ipx filter gns
ipx type-20-propagation
ipx packet-extension
ipx timers
show ipx interface
show ipx traffic
show ipx default-route
show ipx route
show ipx servers
show ipx filter
show ipx type-20-propagation
show ipx packet-extension
show ipx timers