Alcatel-Lucent 6850-48 参照ガイド

Network Time Protocol Commands

page 5-16

OmniSwitch CLI Reference Guide

Enables or Disables NTP server functionality for an interface.

ntp interface {interface-ip} {enable | disable}

IP address of an interface on which NTP server functionality is to be 
disabled.

Enables NTP server functionality on an interface.

Disables NTP sever functionality on an interface.

By default, NTP server functionality is enabled on all the interfaces.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use this command to enable or disable the incoming NTP request.

• Disabling the NTP server functionality drops the NTP request on an interface and synchronization 

information is not sent out.

-> ntp interface 10.10.10.1 disable

-> ntp interface 10.10.10.1 enable

Release 6.4.2; command was introduced. 

alaNtpAccessRestrictedTable

alaNtpAccessRestrictedIpAddress

Displays current NTP status.