Alcatel-Lucent 6850-48 参照ガイド

OSPF Commands

page 41-46

OmniSwitch CLI Reference Guide

Configures support for the graceful restart feature on an OSPF router.

Specifies support for planned and unplanned restarts.

This parameter is currently not supported.

Graceful restart is disabled by default.

OmniSwitch 6850, 6855, 9000, 9000E

• Use the no form of the command to disable support for the graceful restart feature on an OSPF router.

• The minimum hardware configuration for this command is a redundant CMM configuration. This 

command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch 
stackable switches in a standalone configuration.

• On OmniSwitch 6850 Series switches, a graceful restart is supported only on active ports (i.e., inter-

faces) that are on the secondary or idle modules in a stack during a takeover. It is not supported on 
ports on a primary switch in a stack.

-> ip ospf restart-support planned-unplanned

-> no ip ospf restart-support

Release 6.1; command was introduced.

alaProtocolOspf

alaOspfRestartSupport

Displays the OSPF graceful restart related configuration and status.