Alcatel-Lucent 6850-48 参照ガイド
OSPF Commands
page 41-60
OmniSwitch CLI Reference Guide
September 2009
show ip ospf host
Displays information on the configured OSPF hosts.
show ip ospf host [ip_address]
Syntax Definitions
ip_address
A 32-bit IP address for a directly attached host.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is used to display general information for OSPF hosts directly attached to this router.
• See the Related Commands section below to modify the list.
Examples
-> show ip ospf host 172.22.2.115
Host Address TOS Metric Status AreaId
-----------------+-------+-----------+--------+-----------------
143.209.92.12 1 0 Up 0.0.0.0
Release History
Release 6.1; command was introduced.
output definitions
Host Address
A 32-bit IP address for a directly attached host. This can be set using
the
the
ToS
The Type of Service traffic from the host is labeled as. ToS is set using
the
the
Metric
command.
Status
Whether the host is enabled or disabled.
AreaId
The area identification for the host’s area.