Alcatel-Lucent 6850-48 参照ガイド
OSPF Commands
OmniSwitch CLI Reference Guide
September 2009
page 41-87
show ip ospf restart
Displays the OSPF graceful restart related configuration and status.
show ip ospf restart
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch
stackable switches in a standalone configuration.
stackable switches in a standalone configuration.
• On OmniSwitch stackable switches, a graceful restart is supported only on active ports (i.e., inter-
faces) that are on the secondary or idle modules in a stack during a takeover. It is not supported on
ports on a primary switch in a stack.
ports on a primary switch in a stack.
Examples
-> show ip ospf restart
Restart Support
= Enabled,
Restart Interval (in seconds)
= 120,
Restart Status
= Not Restarting,
Restart Age (in seconds)
= 0,
Last Restart Exit Reason
= None,
Restart Helper Support
= Enabled,
Restart Helper Strict Checking
= Enabled,
Restart Helper Mode
= NotHelping
output definitions
Restart Support
The administrative status of OSPF graceful restart, which can be
Enabled or Disabled.
Enabled or Disabled.
Restart Interval
The configured OSPF hitless restart timeout interval, in seconds. Use
the
the
command to modify this parameter.
Restart Status
The current status of OSPF graceful restart, which can be Not Restart-
ing, Unplanned Restart (after a CMM takeover), or Planned Restart
(before CMM takeover).
ing, Unplanned Restart (after a CMM takeover), or Planned Restart
(before CMM takeover).
Restart Age
The remaining time, in seconds, for the current OSPF graceful restart
interval.
interval.