Alcatel-Lucent 6850-48 参照ガイド

IS-IS Commands

page 43-8

OmniSwitch CLI Reference Guide

Enables or disables authentication check for IS-IS PDUs.

enable

Enables authentication check for IS-IS PDUs.

disable

Disables authentication check for IS-IS PDUs.

By default, authentication check is enabled.

OmniSwitch 6850, 9000, 9000E

• If enabled, IS-IS PDUs that fail to match either of the authentication type and key requirements are 

rejected.

• If disabled, the authentication PDUs are generated and the IS-IS PDUs are authenticated on receipt. An 

error message will be generated in case of a mismatch; but PDUs will not be rejected.

-> ip isis auth-check enable

-> ip isis auth-check disable

Release 6.3.1; command was introduced; support for OmniSwitch 9000 added.

vRtrIsisTable

vRtrIsisAuthCheck

Enables authentication and configures the authentication type of IS-
IS protocol globally.

Enables authentication and configures the authentication types for 
specific IS-IS levels.

Displays the IS-IS status.