Alcatel-Lucent 6850-48 参照ガイド
IS-IS Commands
page 43-12
OmniSwitch CLI Reference Guide
September 2009
ip isis hello-auth
Enables or disables the authentication of Hello
PDUs globally.
ip isis hello-auth
no ip isis hello-auth
Syntax Definitions
N/A
Defaults
Authentication check of Hello PDUs is enabled by default.
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
Use the no form of this command to prevent the authentication of Hello packets.
Examples
-> ip isis hello-auth
-> no ip isis hello-auth
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.
Release 6.3.1; support for OmniSwitch 9000 added.
Related Commands
MIB Objects
vRtrIsisTable
vRtrIsisHelloAuthentication
Enables or disables the authentication of Hello PDUs for specific
IS-IS levels.
IS-IS levels.
Displays the IS-IS status.