Alcatel-Lucent 6850-48 参照ガイド

ページ / 3444
IS-IS Commands
page 43-54
OmniSwitch CLI Reference Guide
September 2009
show ip isis status
Displays the IS-IS status.
show ip isis status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show isis status
==========================================================
ISIS Status
==========================================================
System Id : 0050.0500.5001
Admin State              : UP
Last Enabled : WED OCT 24 10:05:55 2007
Level Capability         : L1L2
Authentication Check     : True
Authentication Type      : None
Graceful Restart         : Disabled
GR helper-mode           : Disabled
LSP Lifetime             : 1200
LSP Wait                 : Max :5 sec, Initial :0 sec, Second :1 sec
Adjacency Check          : Loose
L1 Auth Type             : None
L2 Auth Type             : None
L1 Wide Metrics-only     : Disabled
L2 Wide Metrics-only     : Disabled
L1 LSDB Overload         : Disabled
L2 LSDB Overload         : Disabled
L1 LSPs                  : 177
L2 LSPs                  : 177
Last SPF                 : FRI OCT 26 05:04:09 2007
SPF Wait                 : Max :10000 ms, Initial :1000 ms, Second :1000 ms
Hello-Auth Check         : Enabled
Csnp-Auth Check          : Enabled
Psnp-Auth Check          : Enabled
L1 Hello-Auth Check      : Enabled
L1 Csnp-Auth Check       : Enabled
L1 Psnp-Auth Check       : Enabled