Alcatel-Lucent 6850-48 参照ガイド
IS-IS Commands
OmniSwitch CLI Reference Guide
September 2009
page 43-71
ip isis interface retransmit-interval
Configures the minimum time interval between LSP retransmissions on a point-to-point interface.
ip isis interface interface_name retransmit-interval seconds
no ip isis interface interface_name retransmit-interval
Syntax Definitions
interface_name
The name of the interface.
seconds
The minimum time interval (1–65535) in seconds between LSP trans-
missions on a point-to-point interface.
missions on a point-to-point interface.
Defaults
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
Use the no form of this command to restore the default settings.
Examples
-> ip isis interface lan-3 retransmit-interval 130
-> no ip isis interface lan-4 retransmit-interval
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.
Release 6.3.1; support for OmniSwitch 9000 added.
Related Commands
MIB Objects
vRtrIsisIfTbale
vRtrIsisIfRetransmitInterval
parameter
default
seconds
5
Displays the IS-IS interface information.