Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-21
ip bgp as-origin-interval
Specifies the frequency at which routes local to the autonomous system are advertised. These advertise-
ments are also referred to as UPDATE messages. This interval applies to advertisements to internal peers.
ments are also referred to as UPDATE messages. This interval applies to advertisements to internal peers.
ip bgp as-origin-interval seconds
no ip bgp as-origin-interval
Syntax Definitions
seconds
The update interval in seconds. The valid range is 1–65535.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of this command to reset the feature to the default value.
• A lower value may increase the likelihood of route flapping as route status is updated more frequently.
Examples
-> ip bgp as-origin-interval 15
-> no ip bgp as-origin-interval
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaBgpGlobal
alaBgpAsOriginInterval
parameter
default
seconds
15
Set the route advertisement interval for external peers.