Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-25
ip bgp maximum-paths
Enables or disables support for multiple equal paths. When multipath support is enabled and the path
selection process determines that multiple paths are equal when the router-id is disregarded, then all equal
paths are installed in the hardware forwarding table. When multipath support is disabled, only the best
route entry is installed in the hardware forwarding table.
selection process determines that multiple paths are equal when the router-id is disregarded, then all equal
paths are installed in the hardware forwarding table. When multipath support is disabled, only the best
route entry is installed in the hardware forwarding table.
ip bgp maximum-paths
no ip bgp maximum-paths
Syntax Definitions
N/A
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of this command to disable support for multiple equal cost paths.
• The BGP protocol must be disabled (using the
command) before using this command.
Examples
-> ip bgp maximum-paths
-> no ip bgp maximum-paths
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaBgpGlobal
alaBgpMultiPath
Displays the current global settings for the local BGP speaker.