Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-33
ip bgp aggregate-address status
Enables or disables a BGP aggregate route.
ip bgp aggregate-address ip_address ip_mask status {enable | disable}
Syntax Definitions
ip_address
32-bit IP address for this aggregate route.
ip_mask
32-bit subnet mask that determines how many bits of the network
address denote the network number.
address denote the network number.
enable
Enables this aggregate route.
disable
Disables this aggregate route.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
command to configure individual aggregate parameters.
• The
command displays every aggregate currently defined.
Examples
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 status enable
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 status disable
Release History
Release 6.1; command was introduced.
parameter
default
enable | disable
disable