Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
page 44-210
OmniSwitch CLI Reference Guide
September 2009
ipv6 bgp network metric
Configures the Multi-Exit Discriminator (MED) attribute value for an network generated by the ipv6 bgp
network command. This value is sent from routers of one AS to another to indicate the path that the
remote AS can use to send data to the local AS.
network command. This value is sent from routers of one AS to another to indicate the path that the
remote AS can use to send data to the local AS.
ipv6 bgp network ipv6_address/prefix_length [metric num]
Syntax Definitions
ipv6_address
The 128-bit IPv6 address.
/prefix_length
The number of bits that are significant in the IPv6 address (mask)
(3..128).
(3..128).
num
The MED attribute value. The valid range is 0–4294967295.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
The IPv6 BGP route created with the
command should exist before the metric attribute
is defined for the same route.
Examples
-> ipv6 bgp network 2001::1/64 metric 20
Release History
Release 6.1.5; command was introduced.
Related Commands
parameter
default
num
0
Advertises a locally reachable IPv6 address as a IPv6 BGP network
to other BGP peers.
to other BGP peers.
Displays the status of all the IPv6 BGP networks or a specific IPv6
BGP network
BGP network