Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-231
ipv6 bgp neighbor conn-retry-interval
The interval, in seconds, between
BGP
retries to set up a connection with another peer via the trans-
port protocol. In the connect state,
BGP
tries to set up a connection with a remote peer. If the connec-
tion fails, then the connection retry interval starts. Once this interval elapses,
BGP
retries setting up
the connection.
ipv6 bgp neighbor ipv6_address [conn-retry-interval num]
Syntax Definitions
ipv6_address
A 128-bit IPv6 address for the BGP neighbor.
num
The time interval (in seconds) between retries. The valid range is
0–65535.
0–65535.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• The connection retry time interval starts when a connection to a peer is lost.
• Using this command without the num variable resets the variable to its default value.
Examples
-> ipv6 bgp neighbor 2001::2 conn-retry-interval 60
Release History
Release 6.1.5; command was introduced.
Related Commands
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeer6ConnRetryInterval
parameter
default
num
120
Displays the configured IPv6 BGP peers.