Alcatel-Lucent 6850-48 参照ガイド
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-245
show ipv6 bgp neighbors timers
Displays the timers for configured IPv6 BGP peers.
show ipv6 bgp neighbors timers [ipv6_address]
Syntax Definitions
ipv6_address
The 128-bit IPv6 address.
Defaults
By default, the timer values for all the IPv6 BGP peers will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Use the ipv6_address parameter to display the timer value for a specified IPv6 BGP peer.
Examples
-> show ipv6 bgp neighbors timers
Legends: Nbr = Neighbor
As = Autonomous System
RtAdv = Route Advertisement
Kalive = Keep Alive (actual)
Ka(C) = Configured Keep Alive
Nbr address As Hold Hold(C) RtAdv Retry Kalive Ka(C)
----------------------------------+-----+-----+-------+-----+-----+------+-----
2001:100:3:4::1 30 90 90 30 120 30 30
output definitions
Nbr address
The IPv6 address for this BGP peer. Assign this address using the
As
The autonomous system to which this peer belongs. A peer’s AS num-
ber is assigned using the
ber is assigned using the
Hold
The actual negotiated hold time value.
Hold (C)
The hold time value. This value is configured using the
command.
RtAdv
The route advertisement interval, in seconds, for updates between
external BGP peers.
external BGP peers.
Retry
The interval, in seconds, between retries by this peer to set up a connec-
tion via TCP with another peer. This value is configured using the
tion via TCP with another peer. This value is configured using the