Alcatel-Lucent 6850-48 参照ガイド

PIM Commands

OmniSwitch CLI Reference Guide

page 45-3

Dynamically loads PIM to memory.

N/A

N/A

OmniSwitch 6850, 6855, 9000, 9000E

• This command must be executed before PIM can run on the switch.

• This command is supported in both IPv4 and IPv6 PIM.

• The advanced routing image must be loaded to flash before the feature will start to work on the switch.

-> ip load pim

Release 6.1.1; command was introduced.