Alcatel-Lucent 6850-48 参照ガイド
PIM Commands
page 45-46
OmniSwitch CLI Reference Guide
September 2009
show ip pim neighbor
Displays a list of active PIM neighbors.
show ip pim neighbor [ip_address]
Syntax Definitions
ip_address
The 32-bit IP address for the PIM neighbor.
Defaults
If a neighbor’s IP address is not specified, the entire PIM neighbor table is displayed.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
To view more detailed information about a particular neighbor, specify the neighbor's IP address in the
command line. Additional information will be displayed, which includes LAN Prune Delay, Override
Interval, TBit field, State Refresh capable, and Designated Router option status.
command line. Additional information will be displayed, which includes LAN Prune Delay, Override
Interval, TBit field, State Refresh capable, and Designated Router option status.
Examples
-> show ip pim neighbor
Neighbor Address Interface Name Uptime Expires DR Priority
-----------------+--------------------+-----------+-----------+-------------
212.61.20.250 vlan-2 01h:07m:07s 00h:01m:38s 100
212.61.60.200 vlan-6 01h:07m:07s 00h:01m:38s 100
214.28.4.254 vlan-26 01h:07m:07s 00h:01m:38s 100
If a specific neighbor IP address is specified in the command line, detailed information for the correspond-
ing neighbor only displays:
ing neighbor only displays:
-> show ip pim neighbor 212.61.30.7
Neighbor IP Address = 212.61.30.7,
Interface Name = vlan-30,
Uptime = 00h:04m:14s,
Expires = 00h:01m:31s,
Lan Prune Delay Present = true,
Propagation Delay = 500,
Override Interval = 2500,
TBit field = false,
Gen ID Present = true,
Gen ID Value = 0x79ca868e,
BiDir Capable = false,
DR Priority Present = true,
DR Priority = 1,
State Refresh Capable = true