Alcatel-Lucent 6850-48 参照ガイド

PIM Commands

page 45-70

OmniSwitch CLI Reference Guide

Displays all (S,G) state that the IPv4 PIM has.

show ip pim sgroute [source_address group_address]

The 32-bit IP address for a specific multicast source.

A 32-bit multicast address. 

By default, entire (S,G) routing table is displayed. To view the detailed information for a particular (S,G) 
entry, use the source_address and group_address associated with that entry.

OmniSwitch 6850, 6855, 9000, 9000E

• When the source_address and group_address is specified in the command line, the detailed informa-

tion displayed also includes the detailed state of every outgoing interface.

• If an IP address is not specified, the current PIM status for all multicast route entries are displayed.

-> show ip pim sgroute

Legend: Flags: D = Dense, S = Sparse, s = SSM Group,

               L = Local, R = RPT, T = SPT, F = Register,

               P = Pruned, O = Originator

Total 1 (S,G)

Source Address Group Address RPF Interface  Upstream Neighbor UpTime      Flags 

--------------+-------------+--------------+-----------------+-----------+--------

172.21.63.2    225.0.0.0     vlan-30        212.61.30.7       00h:02m:09s ST      

172.21.63.2    225.0.0.1     vlan-30        212.61.30.7       00h:02m:09s ST 

-> show ip pim sgroute 172.21.63.2 225.0.0.0

(172.21.63.2,225.0.0.0)

  UpTime                  = 00h:02m:16s

  PIM Mode                = ASM,

  Upstream Join State     = Joined,

  Upstream RPT State      = Not Pruned,

  Upstream Join Timer     = 00h:00m:44s,

  Upstream Neighbor       = 212.61.30.7,

  RPF Interface           = vlan-30,

  RPF Next Hop            = 212.61.30.7,

  RPF Route Protocol      = OSPF,

  RPF Route Address       = 172.21.63.0/24,

  RPF Route Metric Pref   = 110,

  RPF Route Metric        = 2,