Alcatel-Lucent 6850-48 参照ガイド
DVMRP Commands
page 46-20
OmniSwitch CLI Reference Guide
September 2009
ip dvmrp tunnel ttl
Configures the TTL value for the tunnel defined for the specified local address and remote address. The
TTL value is added to the TTL field of the IP header for outgoing packets destined for the remote tunnel
endpoint.
TTL value is added to the TTL field of the IP header for outgoing packets destined for the remote tunnel
endpoint.
ip dvmrp tunnel {interface_name remote_address} ttl value
Syntax Definitions
interface_name
The name of the interface.
remote_address
Remote IP address of the tunnel.
value
The Time to Live (TTL) value (0–255).
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• The local IP address for the tunnel must match the IP address of an existing DVMRP tunnel.
• A value of 0 indicates that the value is copied from the payload’s header.
Examples
-> ip dvmrp tunnel vlan-2 172.22.2.120 ttl 0
Release History
Release 6.1; command was introduced.
Release 6.1.1; local_address deprecated.
Release 6.1.1; local_address deprecated.
Related Commands
parameter
default
value
255
Adds or deletes a DVMRP tunnel for the specified local and remote
addresses.
addresses.
Displays the DVMRP tunnel entries.